Suggestion with DC Power jacks
-
@kowshik1729 said in Suggestion with DC Power jacks:
easy for integration?
Thes pins can handle 6A or more and easy to use and available local shops.
-
@salmanfaris yeah I've got suggestions like these from people but I'm making more professional product which will be implemented at offices and public places. So I need more like DC barrel plug in kind of thing.
-
How many connectors/terminal do you need? how frequently you need to disconnect and connect plug?
-
@salmanfaris I would need any connector like a barrel jack. The mating cycle per month is very low, something like 2 times it might be removed and connected. These devices will be powered on most time of the day.
-
@kowshik1729 Then go with a standard barrel jack, it can handle 6A.
Recent Posts
-
@milanvarghese No, the battery comes into the play only if there is no power from the solar cell. It's like inverters in our home. They activate only if main power is gone, rest of the time they keep charging. similarly here the direct power will be coming from the solar cell, only if the solar cell can't produce enough voltage battery comes into the loop and starts providing voltage to our circuit.
-
@milanvarghese Basically you have cited the solution to your question. yes, you can run the Arduino microcontroller from a solar panel with some protection circuitry in between. There are many tutorials and blogs out there. You can start with something as following.
-
@Mennyt The general right angled header pins are the cheapest option. Something like this https://robu.in/product/2-54mm-2x20-right-angle-male-header-strip-pack-of-2/?gclid=CjwKCAiA4o79BRBvEiwAjteoYDcmnOSwTUviMZzRBeHz_aENF_fQgj3BrKXAzYs6GIHknHSOJ4_2KhoC1fAQAvD_BwE