Suggestion with DC Power jacks
-
@salmanfaris Does JST have such high power connectors?? It shouldn't be something like header connections. I need it to be like DC barrel connector kind of connectors. And that connector must not heat up even at 6A
-
@kowshik1729 said in Suggestion with DC Power jacks:
easy for integration?
Thes pins can handle 6A or more and easy to use and available local shops.
-
@salmanfaris yeah I've got suggestions like these from people but I'm making more professional product which will be implemented at offices and public places. So I need more like DC barrel plug in kind of thing.
-
How many connectors/terminal do you need? how frequently you need to disconnect and connect plug?
-
@salmanfaris I would need any connector like a barrel jack. The mating cycle per month is very low, something like 2 times it might be removed and connected. These devices will be powered on most time of the day.
-
@kowshik1729 Then go with a standard barrel jack, it can handle 6A.
Recent Posts
-
@zainmuhammed Can try capturing the GPS when the device is starting the loop instead after joining the LoRaWAN and see?
You can put the GPS value on top of the loop or setup function.
Also, what kind of gateway are you using? Is it configured okay, OTA is done?
-
@salmanfaris Today I tried after connecting a 18650 cell,
Data getting in console after integration of both lora and gps.
here you can see that GPS value is 0,0. also in my previous post you can see that GPS value is not reading.
Also the status LED is active after it is connected to the satellite. -
Hi @zainmuhammed ,
Can you share the GPS and LoRa output when it’s working?
Also can try capturing the GPS when the device is starting the loop instead after joining the LoRaWAN and see?
Also make sure the device provides have enough to modules. The GPS need more power when you cold start.