Via stitching is a technique used in PCB design to reduce the EMI , to keep the short return loops and maintain the low impendence through tracks. especially on the larger copper areas

@salmanfaris
Company Name : FOX 3D PRINTING
Website: https://fox3dprinting.in/
Email: hello@fox3dprinting.in
Location: Kerala
Available Materials : ABS,PLA , PETG
Available Machines: Praman 200 ,praman 140. Artilary ,Custom
Rate : vary 5/gram to 13/gram depends material
Shipping Time/Production Time : depends the model
You are part of it: Yes

@Sara

I already did some projects on Firebase with NodeMCU (ESP8266) .I got run time errors but mine's worked fine .U should check with your libraries . also tested over more than 2 libraries . In the code above u mentioned is not declared the FIREBASE_HOST,FIREBASE_AUTH, WIFI_SSID and WIFI_PASSWORD variable values may be u removed for privacy .The serial gps is not a big deal.U should check ur firbase with the given example of the particular header file or library .I didnt used the ArduinoJson.h library at all ....

Do you want to be a maker? Or are you one.

Come join us on this (21 Sept 2019, Saturday 2.00 PM -4.00 PM) for a gathering. Meet wonderful people ,Share ideas , and start making. We will back you up.

Agenda :-
Introduction to Foxlab Maker Activities
How to be the part of Foxlab Community
Introduction to 3D Printing
3D Printing Demo

Registration Link :http://bit.do/foxlab3

Call for Software Engineering Volunteers | Coronasafe.Network
—

1. CoronaSafe Network is a an open-source public utility designed by a multi-disciplinary team of volunteers along with the Government of Kerala.�

2. The goal is to create a volunteer run defence network to protect the healthcare system of a state or nation against the corona virus attack.�

3. There are currently more than 20 applications that are running live which are designed to give the Chief Minister’s office and general public live information about Hospital Bed Capacity Utilisation, Corona Care Canters Capacity Utilisation, Inventory Management, Volunteer Management, Patient Management, Food Management, Ambulance Network and other features.�

4. We are extremely short on software engineering talent and require immediate and urgent reinforcements from the software engineering community to setup the full network and put in on trial run by March 28th, 2020.��

5. Pass this message to software engineering community.�

Volunteer at http://volunteer.coronasafe.network/

i'm new to the FPGA world ,looking for a fpga dev board to getting started ,I hope u guys will help me to find out ,thanks

@rafitc99 I dont think u can access those like that did you tried those lines after

 goo.getAcData();
 goo.getGyData();

@salmanfaris
Company Name : FOX 3D PRINTING
Website: https://fox3dprinting.in/
Email: hello@fox3dprinting.in
Location: Kerala
Available Materials : ABS,PLA , PETG
Available Machines: Praman 200 ,praman 140. Artilary ,Custom
Rate : vary 5/gram to 13/gram depends material
Shipping Time/Production Time : depends the model
You are part of it: Yes

@rafitc99 I dont think u can access those like that did you tried those lines after

 goo.getAcData();
 goo.getGyData();

@rafitc99 is it fixed ?,u found a solution?

Via stitching is a technique used in PCB design to reduce the EMI , to keep the short return loops and maintain the low impendence through tracks. especially on the larger copper areas

@Sara

I already did some projects on Firebase with NodeMCU (ESP8266) .I got run time errors but mine's worked fine .U should check with your libraries . also tested over more than 2 libraries . In the code above u mentioned is not declared the FIREBASE_HOST,FIREBASE_AUTH, WIFI_SSID and WIFI_PASSWORD variable values may be u removed for privacy .The serial gps is not a big deal.U should check ur firbase with the given example of the particular header file or library .I didnt used the ArduinoJson.h library at all ....

Call for Software Engineering Volunteers | Coronasafe.Network
—

1. CoronaSafe Network is a an open-source public utility designed by a multi-disciplinary team of volunteers along with the Government of Kerala.�

2. The goal is to create a volunteer run defence network to protect the healthcare system of a state or nation against the corona virus attack.�

3. There are currently more than 20 applications that are running live which are designed to give the Chief Minister’s office and general public live information about Hospital Bed Capacity Utilisation, Corona Care Canters Capacity Utilisation, Inventory Management, Volunteer Management, Patient Management, Food Management, Ambulance Network and other features.�

4. We are extremely short on software engineering talent and require immediate and urgent reinforcements from the software engineering community to setup the full network and put in on trial run by March 28th, 2020.��

5. Pass this message to software engineering community.�

Volunteer at http://volunteer.coronasafe.network/

Do you want to be a maker? Or are you one.

Come join us on this (21 Sept 2019, Saturday 2.00 PM -4.00 PM) for a gathering. Meet wonderful people ,Share ideas , and start making. We will back you up.

Agenda :-
Introduction to Foxlab Maker Activities
How to be the part of Foxlab Community
Introduction to 3D Printing
3D Printing Demo

Registration Link :http://bit.do/foxlab3

i'm new to the FPGA world ,looking for a fpga dev board to getting started ,I hope u guys will help me to find out ,thanks