CERN updates its Open Hardware Licence



  • Version 2.0 of the CERN Open Hardware Licence has been released, introducing three variants meant to cater to different collaborative models

    CERN Open Hardware Licence (OHL) is a legal framework to facilitate knowledge exchange on hardware design. Several years after its first publication in 2011, CERN released version 2.0 of the CERN Open Hardware Licence (CERN-OHL) in 2020, which governs the use, copying, modification and distribution of hardware design documentation, and the manufacture and distribution of any resulting products. The latest version uses simpler terminology, introduces three variants of the licence, and broadens its range to include designs that go from artistic to mechanical to electronic, as well as adapting the licence to cases such as application-specific integrated circuits (ASICs) and field-programmable gate arrays (FPGAs). It can even be used to license software.

    more details: https://kt.cern/ohlv2


Log in to reply
 

Recent Posts

  • F

    @salmanfaris best if you could point me to an example that works as described: getting different values depending on hoe close the finger is without really touching. nothing i tried did work yet

    read more
  • F

    @salmanfaris I haven't found a good sensor module for this at all. I used a thing which was calles touch sensor and it returns only 1/0. Tried to use touchRead() but it is not sensitive apparently, only 40 and 1 more or less.

    #define touch_pin_numer 33

    const int VALUE_THRESHOLD = 30;
    int TOUCH_SENSOR_VALUE;
    void setup()
    {
    Serial.begin(115200);
    delay(1000);

    }
    void loop(){
    TOUCH_SENSOR_VALUE = touchRead(touch_pin_numer);
    Serial.println(TOUCH_SENSOR_VALUE);
    if(TOUCH_SENSOR_VALUE < VALUE_THRESHOLD)
    {
    Serial.println ("Touch ON");
    }
    else{
    Serial.println ("Touch OFF");
    }
    }

    should show something between 40 (current max) and 1 (current min) the closer the finger gets but it shows 40/41/39 and 1 - nothing inbetween. got this code from the web

    read more
  • @FlorianB Can you share the code, output window/error and details of the sensor module?

    read more
  • F

    Hi! I am trying to add an capacitive sensor to the ESP32, that will work through glass with 3mm thickness and an distance of 8 to 2 cm. I have bought sensors which only work on touch, i have looked into the touchRead() function but cant get a steady value increase/decrease with distance and only a real touch gets me enough difference to count it as a "touch". I have checked Arduino examples with foil where a resistor can set the sensitivity but nothing worked on my ESP32. i have spent hours looking for an example, can somebody point me to one please?

    read more
  • Capture.PNG

    Welcome to the Second edition of MakerGram Live, a newsletter where we pull together information about Interesting projects, Industry news, upcoming events, job opportunities and other interesting bits that you may find useful. 😉

    If you are a member of makergram, you already received a mail, please check your inbox or you can read from here: MakerGram Live | May 2020 Maker Update

    read more