Error while uploading the program in to ESP32 -S3 sense
A serial exception error occurred: Write timeout
Note: This error originates from pySerial. It is likely not a problem with esptool but ![alt text](image url)the hardware connection or drivers.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
Failed uploading: uploading error: exit status 1
zainmuhammed last edited by zainmuhammed
I suggest to change the firmware. For this you can download the firmware from seeedstudio wiki https://files.seeedstudio.com/wiki/SeeedStudio-XIAO-ESP32S3/res/XIAOESP32S3-Sense-firmware.zip
And use esptool to upload the firmware https://espressif.github.io/esptool-js/
@zainmuhammed Thank you.
@jibin_lks Can you please share the example code and connection diagram?
I been trying to interface Xiao esp32c3 with LoRa via SPI. After uploading the code doesn't get executed by the board but give the message log: "waiting for download". After few attempts by even resigning to other pins as spi instead of default spi pins, found this is occurring specifically when the CS pin is connected to the board. Any help to resolve this?
@jacob_jipson Glad to hear that.
@salmanfaris The problem was resolved. Thankyou so much.
Did you replace the NN folder in the lib as we do for XIAO esp32? and for the AI Thinker ESP32-CAM, you don't need to do that.
now, try to delete the library and re-add a new one and compile.