IPRECON.....India's first student led conference



  • "The joy we feel has little to do with the circumstances of our lives and everything to do with the focus of our lives."
    ~ Russel M. Nelson

    Here is your opportunity to share your knowledge, connect yourself to the Industry professionals and multi disciplinary discussions on the latest advances in an international platform!!

    INDIA'S FIRST IEEE Industry Applications Society CLUB OF 6 TECHNICAL PAPER CONFERENCE - ✨ *2020 IEEE International Power and Renewable Energy Conference (IPRECON)*✨ is on its way to break new grounds. We welcome you all to the integrated crate for the young students and professionals all over the world to embed the technical quality.

    Date : 24th, 25th and 26th July 2020
    Venue :College of Engineering Karunagappally, Kerala, India

    Important Dates:

    Paper Submission Starts : 5th December 2019
    Paper Submission Closes : 29th February 2020
    Notification of Acceptance : 1st April 2020
    Final Camera-ready Paper : 1st May 2020

    1. For Paper Submission visit: https://cmt3.research.microsoft.com/iprecon2020

    2.Call For Paper : http://iprecon2020.org/cfp.html

    For more details, visit: www.iprecon2020.org


Log in to reply
 

Recent Posts

  • F

    @salmanfaris best if you could point me to an example that works as described: getting different values depending on hoe close the finger is without really touching. nothing i tried did work yet

    read more
  • F

    @salmanfaris I haven't found a good sensor module for this at all. I used a thing which was calles touch sensor and it returns only 1/0. Tried to use touchRead() but it is not sensitive apparently, only 40 and 1 more or less.

    #define touch_pin_numer 33

    const int VALUE_THRESHOLD = 30;
    int TOUCH_SENSOR_VALUE;
    void setup()
    {
    Serial.begin(115200);
    delay(1000);

    }
    void loop(){
    TOUCH_SENSOR_VALUE = touchRead(touch_pin_numer);
    Serial.println(TOUCH_SENSOR_VALUE);
    if(TOUCH_SENSOR_VALUE < VALUE_THRESHOLD)
    {
    Serial.println ("Touch ON");
    }
    else{
    Serial.println ("Touch OFF");
    }
    }

    should show something between 40 (current max) and 1 (current min) the closer the finger gets but it shows 40/41/39 and 1 - nothing inbetween. got this code from the web

    read more
  • @FlorianB Can you share the code, output window/error and details of the sensor module?

    read more
  • F

    Hi! I am trying to add an capacitive sensor to the ESP32, that will work through glass with 3mm thickness and an distance of 8 to 2 cm. I have bought sensors which only work on touch, i have looked into the touchRead() function but cant get a steady value increase/decrease with distance and only a real touch gets me enough difference to count it as a "touch". I have checked Arduino examples with foil where a resistor can set the sensitivity but nothing worked on my ESP32. i have spent hours looking for an example, can somebody point me to one please?

    read more
  • Capture.PNG

    Welcome to the Second edition of MakerGram Live, a newsletter where we pull together information about Interesting projects, Industry news, upcoming events, job opportunities and other interesting bits that you may find useful. 😉

    If you are a member of makergram, you already received a mail, please check your inbox or you can read from here: MakerGram Live | May 2020 Maker Update

    read more