0x01: Beyond The Arduino IDE.
-
This webinar is focused on understanding different kind of Arduino development environment like Arduino CLI, VS Code..etc to stretch your Arduino skills.
Maker: Amal Shajan(B45i)
Place: Online
Date: 25th April 2020
Time: 8:40 PMYou'll get a zoom invitation after the registration. you can register here bit.ly/beyond-arduino-ide
Register here at bit.ly/beyond-arduino-ide
-
Please use the zoom invitation link to join. If found any trouble please post it on our Community Forum or Telegram Group.
-
Thank you Amal Shajan for the informative session. Looking forward to having more sessions from you
Recent Posts
-
In this second edition of MakerCuriosity Podcast Series by MakerGram, we are discussing programming Microcontrollers using Python.
The discussion includes how exactly an interpreted language works on a Microcontroller?! Besides that, we have covered the pros and cons and when it is preferred to use Python on Microcontrollers when 95% of existing embedded code is written using either C or C++. Listen now and let us know your feedback and opinion!
Stay tuned till we meet with another exciting topic on next week!
Available at:
Spotify: https://open.spotify.com/episode/7eWdZ9LeH339Vre2htndIE?si=cnGEGusbQkiTf5XTgaLqGw
Anchor: https://anchor.fm/makergram/episodes/MakerCuriosity-EP2-Malayalam-en40u0
Share your valuable feedback
. -
Hi all,
I recently came across this post where they have shown photos printed on PCB in high resolution. I would like to know how to add this kind of photos to the silkscreen layers of the PCB in Eagle/Altium.
Adding such kind of photos will be attractive for beginners and also can be used for educational purposes too.
Please let me know in case anybody knows. -
@kowshik1729 said in Error downloading package:
The license of the https://dl.espressif.com/dl/package_esp32_index.json might be expired(If this is the reason you can't do anything but just wait until they re-activate the license)
If the page liecenceIt's good.
-
@abdultechguy999 usually https://dl.espressif.com/dl/package_esp32_index.json this works while installing through boards manager. But I faced the same issue some times. it might be due to a couple of reasons.
Bad Internet connectivity
The license of the https://dl.espressif.com/dl/package_esp32_index.json might be expired(If this is the reason you can't do anything but just wait until they re-activate the license)
I remember there is a way to install the board files offline by downloading from some github repos.
All the best.
-
Ok, then you need to check the LM2596 output current and voltage!